Furnace fans · ID, FD and high temperature · ISO 9001:2015 certified · Ahmedabad, IndiaFurnace fans · ID, FD and high temperature · ISO 9001:2015 certifiedGas up to 650 °C · built to your airflow and pressureMade in Ahmedabad · Quote within one working day

Furnace fans · made in Ahmedabad

The right fan for your furnace, quoted in one working day.

Tell us your gas, temperature, airflow and pressure. An application engineer replies with a fan recommendation and a quote within one working day.

  • ISO 9001:2015 certified works · making fans since 1997
  • ID, FD and high temperature fans up to 650 °C
  • We tell you plainly if a different fan is the better fit

Get your fan quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

Why it matters

A furnace is only as steady as its fans

The forced draft fan decides how much combustion air reaches the fuel. The induced draft fan decides how fast the flue gas leaves and so sets the pressure inside the furnace. If either is wrong for the duty, the furnace runs badly, whatever the burner.

Built for hot gas

Material, bearings, shaft cooling and seals are chosen from your gas temperature, not left at a standard build.

ID, FD and recirculation

One works builds the induced draft fan, the forced draft fan and the hot gas fan, so the furnace draught is designed as one system.

Engineered to your duty

Impeller, casing and drive follow your airflow and pressure. Make-to-order is part of the range, not an exception.

Tested and balanced

Performance testing to IS 4894 and dynamic balancing to ISO 1940-1, Grade G6.3 or G2.5.

An honest fit check

If your duty needs a different fan type or a temperature review, we say so at the enquiry stage.

Built from your data

We start with your gas, temperature, airflow and pressure. We do not pick a fan from a price list.

What we supply

Fans for every point on a furnace

AS Engineers designs and builds centrifugal fans for furnaces, boilers, kilns and ovens: induced draft, forced draft and high temperature duties. Pick the fan you need, or tell us your duty and we will recommend one.

Induced draft (ID) fans

Sit after the furnace or boiler and draw the hot flue gas out through the duct and stack. AS Engineers builds them as backward curved centrifugal fans.

Best for Keeping the furnace draught steady and the flue gas moving

Get a quote

Forced draft (FD) fans

Push combustion air into the furnace through the burners or grate, in the volume the fuel needs.

Best for Combustion air supply

Get a quote

High temperature plug fans

Single or double inlet fans for hot air and gas up to 650 C, with the material, bearing and cooling arrangement chosen for the temperature.

Best for Furnaces, ovens, kilns and hot gas recirculation

Get a quote

Radial blade and high pressure fans

Open or closed radial blade impellers for high pressure duties and dust-laden or sticky gas.

Best for High static pressure, dirty gas

Get a quote

Exhausters and air handling fans

Industrial exhausters for furnace exhaust, fume and process air handling.

Best for Furnace exhaust and process air

Get a quote

Fans made to order

When the duty point is not a standard one, we engineer the impeller, casing and drive to your specification.

Best for Retrofit or a one-off duty

Get a quote

Temperature and material

What a fan is made of at your gas temperature

AS Engineers builds fans for gas from ambient up to 650 °C. The hotter the gas, the more the material, bearing arrangement and cooling matter.

Gas temperatureTypical materialNotes
Up to 150 °CMild steelStandard construction
150 to 250 °CMild steel or SS 304Choice depends on the gas and how corrosive it is
250 to 350 °CMild steel, SS 304 or SS 321Separated pedestal design is used above about 300 °C
350 to 500 °CSS 321 or SS 310Shaft cooler and insulated pedestal
500 to 650 °CSS 310 or a high temperature alloyEvery duty is reviewed individually

These are typical choices. The final choice depends on the gas composition, how corrosive or abrasive it is, and whether the temperature is steady or cycles.

FAQ

Questions buyers ask us

What is a furnace fan?

A furnace fan is an industrial centrifugal fan used with a furnace, boiler, kiln or oven. It either supplies combustion air to the furnace (a forced draft fan) or draws the hot flue gas away from it (an induced draft fan). Some duties need a high temperature fan that moves hot air or gas inside the process.

What is a furnace fan?

A furnace fan is an industrial centrifugal fan used with a furnace, boiler, kiln or oven. It either supplies combustion air to the furnace (a forced draft fan) or draws the hot flue gas away from it (an induced draft fan). Some duties need a high temperature fan that moves hot air or gas inside the process.

What is the difference between an ID fan and an FD fan?

A forced draft (FD) fan sits before the furnace and pushes combustion air in. An induced draft (ID) fan sits after the furnace and draws the flue gas out. The FD fan handles clean air near ambient temperature. The ID fan handles hot, often dusty flue gas, so its material, bearings and cooling are chosen for that.

What is the difference between an ID fan and an FD fan?

A forced draft (FD) fan sits before the furnace and pushes combustion air in. An induced draft (ID) fan sits after the furnace and draws the flue gas out. The FD fan handles clean air near ambient temperature. The ID fan handles hot, often dusty flue gas, so its material, bearings and cooling are chosen for that.

Which fans does AS Engineers make for furnaces?

Induced draft fans, forced draft fans, high temperature plug fans, high pressure radial blade fans, industrial exhausters and fans made to order. They are built at our works in GIDC Vatva, Ahmedabad.

Which fans does AS Engineers make for furnaces?

Induced draft fans, forced draft fans, high temperature plug fans, high pressure radial blade fans, industrial exhausters and fans made to order. They are built at our works in GIDC Vatva, Ahmedabad.

Tell us your gas and temperature. We will select your fan.

Share the gas, temperature, airflow and pressure. Get a fan recommendation and a quote within one working day.

Request your free quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

Chat with us
Secure form

Get your fan quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

SSL-encrypted. Your details go only to our engineers – never shared or sold.