Furnace fans · ID, FD and high temperature · ISO 9001:2015 certified · Ahmedabad, IndiaFurnace fans · ID, FD and high temperature · ISO 9001:2015 certifiedGas up to 650 °C · built to your airflow and pressureMade in Ahmedabad · Quote within one working day

Industries

Furnace Fans by Industry

Furnace fans for cement, power, steel, foundry, ceramics, glass, chemical, fertiliser and automotive plants, with the usual duty for each. From AS Engineers, Ahmedabad.

  • ISO 9001:2015 · TÜV certified
  • 25+ years · 3000+ customers
  • Engineered to your process

Industries

Furnace fans for plants that burn fuel or move hot gas

Cement, power, steel, foundry, ceramics, glass, chemical, fertiliser and automotive plants all depend on fans to supply air to a furnace and take the gas away. The gas and temperature differ from plant to plant, but the questions are the same: how much air, at what temperature, against what resistance.

  • Many industries, one engineering approach
  • Duty checked before we quote

Industries

Where our furnace fans run

Plants that burn fuel or handle hot air and gas, and need the draught to stay steady.

Cement

Kiln induced draft fans and raw mill fans

Power plants

Forced draft and induced draft fans, flue gas handling

Steel and metals

Combustion air supply and furnace exhaust

Foundries

Furnace air supply and hot gas handling

Ceramics and glass

Kiln and furnace air and gas

Chemical and fertiliser

Process heaters, dryers and exhaust

Automotive

Heat treatment furnace air supply

Pulp, paper and food

Dryers, ovens and heat recovery

What each industry asks for

The usual concerns, industry by industry

Cement

Kiln induced draft fans and raw mill fans run on hot, dusty gas. Dust load and wear shape the impeller.

Power plants

Forced draft and induced draft fans and flue gas handling auxiliaries. Reliability and steady draught matter most.

Steel and metals

Combustion air supply and furnace exhaust, often with fluctuating load and temperature.

Foundries

Furnace air supply and hot gas handling around melting and heat treatment.

Ceramics and glass

Kiln and furnace air and gas at steady high temperature.

Automotive

Air supply for heat treatment furnaces.

Temperature and material

What a fan is made of at your gas temperature

AS Engineers builds fans for gas from ambient up to 650 °C. The hotter the gas, the more the material, bearing arrangement and cooling matter.

Gas temperatureTypical materialNotes
Up to 150 °CMild steelStandard construction
150 to 250 °CMild steel or SS 304Choice depends on the gas and how corrosive it is
250 to 350 °CMild steel, SS 304 or SS 321Separated pedestal design is used above about 300 °C
350 to 500 °CSS 321 or SS 310Shaft cooler and insulated pedestal
500 to 650 °CSS 310 or a high temperature alloyEvery duty is reviewed individually

These are typical choices. The final choice depends on the gas composition, how corrosive or abrasive it is, and whether the temperature is steady or cycles.

FAQ

Questions buyers ask us

What is a furnace fan?

A furnace fan is an industrial centrifugal fan used with a furnace, boiler, kiln or oven. It either supplies combustion air to the furnace (a forced draft fan) or draws the hot flue gas away from it (an induced draft fan). Some duties need a high temperature fan that moves hot air or gas inside the process.

What is a furnace fan?

A furnace fan is an industrial centrifugal fan used with a furnace, boiler, kiln or oven. It either supplies combustion air to the furnace (a forced draft fan) or draws the hot flue gas away from it (an induced draft fan). Some duties need a high temperature fan that moves hot air or gas inside the process.

What is the difference between an ID fan and an FD fan?

A forced draft (FD) fan sits before the furnace and pushes combustion air in. An induced draft (ID) fan sits after the furnace and draws the flue gas out. The FD fan handles clean air near ambient temperature. The ID fan handles hot, often dusty flue gas, so its material, bearings and cooling are chosen for that.

What is the difference between an ID fan and an FD fan?

A forced draft (FD) fan sits before the furnace and pushes combustion air in. An induced draft (ID) fan sits after the furnace and draws the flue gas out. The FD fan handles clean air near ambient temperature. The ID fan handles hot, often dusty flue gas, so its material, bearings and cooling are chosen for that.

Which fans does AS Engineers make for furnaces?

Induced draft fans, forced draft fans, high temperature plug fans, high pressure radial blade fans, industrial exhausters and fans made to order. They are built at our works in GIDC Vatva, Ahmedabad.

Which fans does AS Engineers make for furnaces?

Induced draft fans, forced draft fans, high temperature plug fans, high pressure radial blade fans, industrial exhausters and fans made to order. They are built at our works in GIDC Vatva, Ahmedabad.

Tell us your gas and temperature. We will select your fan.

Share the gas, temperature, airflow and pressure. Get a fan recommendation and a quote within one working day.

Request your free quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

Ready when you are

Dry smarter. Haul less. Save more.

Tell us your gas, temperature and airflow. We reply with a fan recommendation within one working day.

[ase_paddle_divider]
Chat with us
Secure form

Get your fan quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

SSL-encrypted. Your details go only to our engineers – never shared or sold.