Furnace fans · ID, FD and high temperature · ISO 9001:2015 certified · Ahmedabad, IndiaFurnace fans · ID, FD and high temperature · ISO 9001:2015 certifiedGas up to 650 °C · built to your airflow and pressureMade in Ahmedabad · Quote within one working day

Services

Furnace Fan Services

Duty review, manufacture in our own works, testing to IS 4894, bearing and seal replacement and spares. Furnace fan services from AS Engineers, Ahmedabad.

  • ISO 9001:2015 · TÜV certified
  • 25+ years · 3000+ customers
  • Engineered to your process

Design, supply and support

From your duty data to a fan that runs

One team takes you from your gas data to a working fan.

Duty review

We start from your gas, temperature, airflow and pressure, and check the fan type before we quote.

Made in our own works

Impellers, casings and fans are fabricated at our works in GIDC Vatva, Ahmedabad.

Tested and balanced

Performance testing to IS 4894 and dynamic balancing to ISO 1940-1, with test reports.

Bearing and seal replacement

After-sales support for bearings and seals on the fans we supply.

Spare parts

Impellers and other parts for existing fans, made in the same works.

Made to order

When the duty is not a standard one, we engineer the fan to your specification.

What we supply

Fans for every point on a furnace

AS Engineers designs and builds centrifugal fans for furnaces, boilers, kilns and ovens: induced draft, forced draft and high temperature duties. Pick the fan you need, or tell us your duty and we will recommend one.

Induced draft (ID) fans

Sit after the furnace or boiler and draw the hot flue gas out through the duct and stack. AS Engineers builds them as backward curved centrifugal fans.

Best for Keeping the furnace draught steady and the flue gas moving

Get a quote

Forced draft (FD) fans

Push combustion air into the furnace through the burners or grate, in the volume the fuel needs.

Best for Combustion air supply

Get a quote

High temperature plug fans

Single or double inlet fans for hot air and gas up to 650 C, with the material, bearing and cooling arrangement chosen for the temperature.

Best for Furnaces, ovens, kilns and hot gas recirculation

Get a quote

Radial blade and high pressure fans

Open or closed radial blade impellers for high pressure duties and dust-laden or sticky gas.

Best for High static pressure, dirty gas

Get a quote

Exhausters and air handling fans

Industrial exhausters for furnace exhaust, fume and process air handling.

Best for Furnace exhaust and process air

Get a quote

Fans made to order

When the duty point is not a standard one, we engineer the impeller, casing and drive to your specification.

Best for Retrofit or a one-off duty

Get a quote

Also from AS Engineers

Related equipment from the same works

Fans often sit next to dust collection and conveying. These are the AS Engineers ranges we are asked about alongside a furnace fan.

Centrifugal blowers

The full blower and fan range, including high pressure radial blade blowers.

Centrifugal blowers →

Bag filters and cyclones

Dust collection for furnace exhaust and any dusty process.

Bag filters and cyclones →

Pneumatic conveying

Dilute phase conveying lines for powders and granules.

Pneumatic conveying →

FAQ

Service questions

How do I get a quotation?

Use the quote form, or call or WhatsApp us with the gas, temperature, airflow and static pressure. A fan engineer replies within one working day with a recommendation, and a quote once the duty is clear. Our phone is +91 99090 33851.

How do I get a quotation?

Use the quote form, or call or WhatsApp us with the gas, temperature, airflow and static pressure. A fan engineer replies within one working day with a recommendation, and a quote once the duty is clear. Our phone is +91 99090 33851.

What does a furnace fan cost?

There is no fixed price, because the cost depends on the airflow, the pressure, the gas temperature, the material, the drive and the controls. Two fans that look alike can differ a lot in cost. We quote once we understand the duty, and the six facts on this site tell us what we need.

What does a furnace fan cost?

There is no fixed price, because the cost depends on the airflow, the pressure, the gas temperature, the material, the drive and the controls. Two fans that look alike can differ a lot in cost. We quote once we understand the duty, and the six facts on this site tell us what we need.

Can you supply spares or support for an existing fan?

Yes. We offer bearing and seal replacement and spare parts as after-sales support. Send the fan details and the problem and an engineer will reply.

Can you supply spares or support for an existing fan?

Yes. We offer bearing and seal replacement and spare parts as after-sales support. Send the fan details and the problem and an engineer will reply.

Tell us your gas and temperature. We will select your fan.

Share the gas, temperature, airflow and pressure. Get a fan recommendation and a quote within one working day.

Request your free quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

Ready when you are

Dry smarter. Haul less. Save more.

Tell us your gas, temperature and airflow. We reply with a fan recommendation within one working day.

[ase_paddle_divider]
Chat with us
Secure form

Get your fan quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

SSL-encrypted. Your details go only to our engineers – never shared or sold.