Furnace fans · ID, FD and high temperature · ISO 9001:2015 certified · Ahmedabad, IndiaFurnace fans · ID, FD and high temperature · ISO 9001:2015 certifiedGas up to 650 °C · built to your airflow and pressureMade in Ahmedabad · Quote within one working day

Calculator

Furnace Fan Gas Volume Calculator

Free hot gas volume calculator: convert normal flow in Nm3/hr to actual m3/hr at your gas temperature, and see the usual fan material from 20 to 650 °C.

  • ISO 9001:2015 · TÜV certified
  • 25+ years · 3000+ customers
  • Engineered to your process

Hot gas volume calculator

How much bigger is your gas flow when it is hot?

Hot gas takes up more room. Enter the flow at normal conditions and the gas temperature, and see the actual volume the fan has to move and the material usually used at that temperature.

0 m³/hractual gas volume at the fan inlet
Expansion factor
0 ×
Actual volume per minute
0 m³/min
Typical material at this temperature*
0
Get this fan sized by an engineer

*Indicative only. Actual volume = normal volume × (273 + gas temperature) ÷ 273, at the same pressure. Real selection also depends on gas density and composition, altitude, duct resistance and the fan curve, so we size every fan from your duty data.

How the number works

What the calculator does, and what it does not

Gas expands when it is heated. The actual volume equals the normal volume multiplied by (273 + temperature) divided by 273, at the same pressure.

Why it matters

A fan moves a volume, not a mass. A hot gas stream of the same mass is a much bigger volume, so the fan must be bigger.

Normal vs actual

Normal conditions are a fixed reference (Nm³/hr). Actual conditions are what the fan really sees at its inlet (m³/hr).

Material

The temperature also decides the material and the bearing arrangement, so the calculator shows the usual choice.

What it leaves out

A real selection needs more than this

Gas density and composition, altitude, duct and furnace resistance, and the fan curve all decide the fan. That is why we size every fan from your duty data and ask for a layout sketch.

Before we quote

Six facts we need to select your fan

Do not worry if you do not have all of them. Send what you know, and our engineers will ask for the rest.

1Gas

Hot air, flue gas or process gas, with its composition if it is corrosive, wet or dusty.

2Temperature

Normal and peak gas temperature at the fan inlet.

3Airflow

Volume in m3/hr or Nm3/hr, and whether it is at actual or normal conditions.

4Pressure

Static pressure the fan must develop, or the duct and furnace resistance.

5Duty

Induced draft, forced draft or recirculation, number of fans, standby needs.

6Site

Power supply, space limits, a layout sketch, fuel and any CPCB or safety requirements.

Want this checked by an engineer?

Send your numbers with the gas details. We will select the fan properly and reply within one working day.

Request your free quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

Ready when you are

Dry smarter. Haul less. Save more.

Tell us your gas, temperature and airflow. We reply with a fan recommendation within one working day.

[ase_paddle_divider]
Chat with us
Secure form

Get your fan quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

SSL-encrypted. Your details go only to our engineers – never shared or sold.