Furnace fans · ID, FD and high temperature · ISO 9001:2015 certified · Ahmedabad, IndiaFurnace fans · ID, FD and high temperature · ISO 9001:2015 certifiedGas up to 650 °C · built to your airflow and pressureMade in Ahmedabad · Quote within one working day

Answers

Furnace Fan FAQ

Straight answers on furnace fans: ID vs FD fans, temperature limits, materials, airflow and pressure range, testing, price and quotations.

  • ISO 9001:2015 · TÜV certified
  • 25+ years · 3000+ customers
  • Engineered to your process

FAQ

The basics

What is a furnace fan?

A furnace fan is an industrial centrifugal fan used with a furnace, boiler, kiln or oven. It either supplies combustion air to the furnace (a forced draft fan) or draws the hot flue gas away from it (an induced draft fan). Some duties need a high temperature fan that moves hot air or gas inside the process.

What is a furnace fan?

A furnace fan is an industrial centrifugal fan used with a furnace, boiler, kiln or oven. It either supplies combustion air to the furnace (a forced draft fan) or draws the hot flue gas away from it (an induced draft fan). Some duties need a high temperature fan that moves hot air or gas inside the process.

What is the difference between an ID fan and an FD fan?

A forced draft (FD) fan sits before the furnace and pushes combustion air in. An induced draft (ID) fan sits after the furnace and draws the flue gas out. The FD fan handles clean air near ambient temperature. The ID fan handles hot, often dusty flue gas, so its material, bearings and cooling are chosen for that.

What is the difference between an ID fan and an FD fan?

A forced draft (FD) fan sits before the furnace and pushes combustion air in. An induced draft (ID) fan sits after the furnace and draws the flue gas out. The FD fan handles clean air near ambient temperature. The ID fan handles hot, often dusty flue gas, so its material, bearings and cooling are chosen for that.

Which fans does AS Engineers make for furnaces?

Induced draft fans, forced draft fans, high temperature plug fans, high pressure radial blade fans, industrial exhausters and fans made to order. They are built at our works in GIDC Vatva, Ahmedabad.

Which fans does AS Engineers make for furnaces?

Induced draft fans, forced draft fans, high temperature plug fans, high pressure radial blade fans, industrial exhausters and fans made to order. They are built at our works in GIDC Vatva, Ahmedabad.

Which industries use furnace fans?

Cement, power, steel and metals, foundries, ceramics and glass, chemical, fertiliser, automotive heat treatment, and pulp and paper plants all use fans to supply air to furnaces and handle hot gas.

Which industries use furnace fans?

Cement, power, steel and metals, foundries, ceramics and glass, chemical, fertiliser, automotive heat treatment, and pulp and paper plants all use fans to supply air to furnaces and handle hot gas.

Do you make fans to my specification?

Yes. Fans are engineered to your duty point, and a make-to-order build is part of our range. Send the gas, temperature, airflow and pressure and we select or design the fan.

Do you make fans to my specification?

Yes. Fans are engineered to your duty point, and a make-to-order build is part of our range. Send the gas, temperature, airflow and pressure and we select or design the fan.

FAQ

Technical

What gas temperature can your fans handle?

Our centrifugal fan range covers operating temperatures from ambient up to 650 °C. The material and construction change with temperature: mild steel at lower temperatures, then SS 304, SS 321 and SS 310 as the gas gets hotter. Duties above 500 °C are reviewed one by one.

What gas temperature can your fans handle?

Our centrifugal fan range covers operating temperatures from ambient up to 650 °C. The material and construction change with temperature: mild steel at lower temperatures, then SS 304, SS 321 and SS 310 as the gas gets hotter. Duties above 500 °C are reviewed one by one.

What airflow and pressure range do you cover?

Airflow from 100 to 2,50,000 m³/hr, with designs up to 3,50,000 m³/hr, and static pressure from 25 to 2,100 mmWC. The motor range is 0.5 to 500 HP and the impeller diameter 250 to 2,200 mm.

What airflow and pressure range do you cover?

Airflow from 100 to 2,50,000 m³/hr, with designs up to 3,50,000 m³/hr, and static pressure from 25 to 2,100 mmWC. The motor range is 0.5 to 500 HP and the impeller diameter 250 to 2,200 mm.

What is the difference between backward curved and radial blade impellers?

A backward curved impeller gives good efficiency and a power curve that does not overload the motor, so it is the usual choice for clean or lightly dusty gas. A radial blade impeller is a sturdier shape that suits dusty, dirty or sticky gas and high pressure duty.

What is the difference between backward curved and radial blade impellers?

A backward curved impeller gives good efficiency and a power curve that does not overload the motor, so it is the usual choice for clean or lightly dusty gas. A radial blade impeller is a sturdier shape that suits dusty, dirty or sticky gas and high pressure duty.

How do you cool a fan that handles hot gas?

A shaft cooler and a cooling disc carry heat away from the shaft, and an insulated pedestal keeps the bearings cooler. At higher temperature a separated pedestal design is used, with fixed and floating bearings so the parts can grow, and expansion bellows in the duct.

How do you cool a fan that handles hot gas?

A shaft cooler and a cooling disc carry heat away from the shaft, and an insulated pedestal keeps the bearings cooler. At higher temperature a separated pedestal design is used, with fixed and floating bearings so the parts can grow, and expansion bellows in the duct.

Which materials do you build fans in?

Mild steel, carbon steel (SA516 Gr.70), stainless steel SS 304, 304L, 316, 316L, 321, SS 410 and duplex 2205, and aluminium, with hard facing on blade leading edges where the dust is abrasive. The choice depends on the gas temperature, composition and dust.

Which materials do you build fans in?

Mild steel, carbon steel (SA516 Gr.70), stainless steel SS 304, 304L, 316, 316L, 321, SS 410 and duplex 2205, and aluminium, with hard facing on blade leading edges where the dust is abrasive. The choice depends on the gas temperature, composition and dust.

How are your fans tested?

Performance is tested to IS 4894 (BIS) and impellers are dynamically balanced to ISO 1940-1, Grade G6.3 or G2.5. Material test certificates and positive material identification documents are available where the duty asks for them.

How are your fans tested?

Performance is tested to IS 4894 (BIS) and impellers are dynamically balanced to ISO 1940-1, Grade G6.3 or G2.5. Material test certificates and positive material identification documents are available where the duty asks for them.

FAQ

Price, delivery and service

How do I get a quotation?

Use the quote form, or call or WhatsApp us with the gas, temperature, airflow and static pressure. A fan engineer replies within one working day with a recommendation, and a quote once the duty is clear. Our phone is +91 99090 33851.

How do I get a quotation?

Use the quote form, or call or WhatsApp us with the gas, temperature, airflow and static pressure. A fan engineer replies within one working day with a recommendation, and a quote once the duty is clear. Our phone is +91 99090 33851.

What does a furnace fan cost?

There is no fixed price, because the cost depends on the airflow, the pressure, the gas temperature, the material, the drive and the controls. Two fans that look alike can differ a lot in cost. We quote once we understand the duty, and the six facts on this site tell us what we need.

What does a furnace fan cost?

There is no fixed price, because the cost depends on the airflow, the pressure, the gas temperature, the material, the drive and the controls. Two fans that look alike can differ a lot in cost. We quote once we understand the duty, and the six facts on this site tell us what we need.

Can you supply spares or support for an existing fan?

Yes. We offer bearing and seal replacement and spare parts as after-sales support. Send the fan details and the problem and an engineer will reply.

Can you supply spares or support for an existing fan?

Yes. We offer bearing and seal replacement and spare parts as after-sales support. Send the fan details and the problem and an engineer will reply.

Do you visit the site before quoting?

For many duties, yes. A site visit lets us see the furnace, the duct layout and the space before agreeing the fan. Ask for one in the quote form.

Do you visit the site before quoting?

For many duties, yes. A site visit lets us see the furnace, the duct layout and the space before agreeing the fan. Ask for one in the quote form.

Tell us your gas and temperature. We will select your fan.

Share the gas, temperature, airflow and pressure. Get a fan recommendation and a quote within one working day.

Request your free quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

Ready when you are

Dry smarter. Haul less. Save more.

Tell us your gas, temperature and airflow. We reply with a fan recommendation within one working day.

[ase_paddle_divider]
Chat with us
Secure form

Get your fan quote

Step 1 of 2 · takes 30 seconds
What do you need?

Airflow, if you know it (m³/hr)

No spam · reply within one working day

Where should we send your proposal?

Prefer to talk? +91 99090 33851 · WhatsApp

SSL-encrypted. Your details go only to our engineers – never shared or sold.